Yanked out the winker wiring, speedo cable, and the remnants of the old left side handle grip. We're now left with a nice clean handlebar that we'll have to build up from scratch.
Sunday, December 18, 2011
Friday, December 16, 2011
Evapo-Rust
My gallon of Evapo-Rust got delivered the other day and I was pretty
eager to see if it lived up to the hype. Twenty-four hours later I was
sold.
Not only is it effective, the process itself couldn't be simpler. And it's non-toxic to boot. And it's not that expensive ($26.95 shipped for my gallon jug). And it's re-usable. What more could you ask for?
So you take a badly rusted bolt that looks like this:
You soak it overnight, and end up with this:
Viola, no more rust!
Not only is it effective, the process itself couldn't be simpler. And it's non-toxic to boot. And it's not that expensive ($26.95 shipped for my gallon jug). And it's re-usable. What more could you ask for?
So you take a badly rusted bolt that looks like this:
You soak it overnight, and end up with this:
Viola, no more rust!
Labels:
1969 S90,
metal polishing,
restoration,
rust,
s90
Tuesday, December 13, 2011
S90: Winker Switch
Apparently they're commonly referred to as "winkers" in Asia as opposed to blinkers or turn signals.
Popped it open to see what we had to work with. The switch was stuck in place so I figured it couldn't get much worse. Took everything apart and soaked the metal bits in carb cleaner (no plastics!) followed by a good scrub with the bristle brush.
Some of the rusty parts are soaking in Evapo-Rust now. I think the stuck switch is due to the ball detent frozen in place. Pictures of the cleaned up and (hopefully) repaired parts to follow soon...
Popped it open to see what we had to work with. The switch was stuck in place so I figured it couldn't get much worse. Took everything apart and soaked the metal bits in carb cleaner (no plastics!) followed by a good scrub with the bristle brush.
Some of the rusty parts are soaking in Evapo-Rust now. I think the stuck switch is due to the ball detent frozen in place. Pictures of the cleaned up and (hopefully) repaired parts to follow soon...
Labels:
1969 S90,
electrical,
restoration,
s90
Monday, December 12, 2011
S90: Speedo Inspection
Yanked out the speedo to take a closer look. It seems in good shape except the green lens has come loose and the inside of the glass could use a good cleaning. Unfortunately I have yet to figure out how to open the thing up.
Labels:
1969 S90,
restoration,
s90
Sunday, December 11, 2011
S90: Polishing Continued
A little more polishing today... starting with the easy part of the clutch cover.
Before...
Also the dimmer switch... which I probably won't even get to use in the end, given that I inadvertently melted the plastic part of the switch with carb cleaner.
Before...
And after...
Also the dimmer switch... which I probably won't even get to use in the end, given that I inadvertently melted the plastic part of the switch with carb cleaner.
Labels:
1969 S90,
metal polishing,
restoration,
s90
Saturday, December 10, 2011
S90: Aluminum Polishing Test
The bike will never look right until the paint is freshened up and the engine and chrome is polished. I'd read up on aluminum polishing and it looked pretty straight-forward. Decided to attack it as follows:
The only metal polish I had was an ancient jar of BlueMagic polish but it still seemed to work pretty well. I have a tube of Autosol coming by mail, though, so I'll have to compare that as I've heard it works wonders.
Before...
And after...
- Clean with solvent and steel wool to remove any and all debris
- Go at it with 400 grain sandpaper
- Then 600 sandpaper
- Then 1500 sandpaper
- And finally apply a good metal polish
The only metal polish I had was an ancient jar of BlueMagic polish but it still seemed to work pretty well. I have a tube of Autosol coming by mail, though, so I'll have to compare that as I've heard it works wonders.
Before...
And after...
Labels:
1969 S90,
metal polishing,
restoration,
s90
S90: Dimmer Switch
Spent the last week fiddling with small electrical projects at home, creating little switch boxes, rigging up a night light, etc. All to get comfortable enough with electrical wiring to start tackling the S90's fifteen year old system.
Since I'd taken the dimmer switch apart once before to clean the gunk out and get the thumb switch operable again, I figured I'd start there. With the switch open and the thumb lever removed, you can easily see the wiring and the actual black switch that moves back and forth to change the connection.
Now I just have to get the little plate off that holds the wiring and black switch in place. It was so covered with gunk that I couldn't really get a good look at it. At first I thought it was a rivet. But looking at the close up photo I took, perhaps it's actually a screw just filled with crud. I'll need to soak everything in carb cleaner and go a few rounds with the bristle brush to see what's actually lurking under there.
The next problem was that the plastic shroud around the wires themselves was so old that it was frozen stiff and would literally crack into pieces with the slightest pressure. No amount of tugging and pulling would get it to pull free from the handlebar. So I first decided to cut the wires right below where they exited from the bottom of the handlebar.
Next, I just pulled the wires themselves out, leaving the shroud behind. I had a little heart attack when I realized that if I couldn't get the carcass of the shroud out of the tube, I'd never get anything else back in. But each time I tried to grab and end with the pliers and yank it through, the plastic would just shred apart.
Finally, though, I was able to use the needle nose and get enough purchase to slowly lever it out, centimeter by centimeter, using the hole itself as a fulcrum for leverage. Going very slowly so as not to tear it, I was able to pull it up and out.
The offending piece of ancient plastic, like something clogging an artery.
Now, I only hope the same thing works when I do the other side!
Since I'd taken the dimmer switch apart once before to clean the gunk out and get the thumb switch operable again, I figured I'd start there. With the switch open and the thumb lever removed, you can easily see the wiring and the actual black switch that moves back and forth to change the connection.
Now I just have to get the little plate off that holds the wiring and black switch in place. It was so covered with gunk that I couldn't really get a good look at it. At first I thought it was a rivet. But looking at the close up photo I took, perhaps it's actually a screw just filled with crud. I'll need to soak everything in carb cleaner and go a few rounds with the bristle brush to see what's actually lurking under there.
The next problem was that the plastic shroud around the wires themselves was so old that it was frozen stiff and would literally crack into pieces with the slightest pressure. No amount of tugging and pulling would get it to pull free from the handlebar. So I first decided to cut the wires right below where they exited from the bottom of the handlebar.
Next, I just pulled the wires themselves out, leaving the shroud behind. I had a little heart attack when I realized that if I couldn't get the carcass of the shroud out of the tube, I'd never get anything else back in. But each time I tried to grab and end with the pliers and yank it through, the plastic would just shred apart.
Finally, though, I was able to use the needle nose and get enough purchase to slowly lever it out, centimeter by centimeter, using the hole itself as a fulcrum for leverage. Going very slowly so as not to tear it, I was able to pull it up and out.
The offending piece of ancient plastic, like something clogging an artery.
Now, I only hope the same thing works when I do the other side!
Labels:
1969 S90,
electrical,
s90
Subscribe to:
Posts (Atom)