Finished cutting the custom pin for the new DRATV race camshaft.
Went to install the new cam and just couldn't get it to fully insert! Seemed to go in ok, but just couldn't get it to seat into that last inch.
Had both valves loosened, but looking back, thinking that I didn't loosen them quite enough. Vaguely remember that the exhaust valve was still too tight.
Didn't want to force it so backed off and reinstalled the original cam.
Then, thinking the day wouldn't be a total loss, went to install the 13t front sprocket. Got it installed easy enough (although for some reason getting the master link off was a real pain, ended up ordering master link pliers) but quickly realized that the chain was hitting the sprocket plate.
So backed off of that, too and reinstalled the original sprocket.
Back to square one!
No comments:
Post a Comment