Had the brilliant idea to use the offset Keihin in Red. Got all the way to bolting it on then realized exactly why I'd never done it before: fuel inlet is on the wrong side.
But since I'd cut a new DIY gasket for it already, I was able to put that into the E05 that had been leaking a just reinstall it.
Couldn't get her started right away. Seems to be very fussy about screw settings.
Final air screw setting is 3/4 out and plenty of throttle screw. This setting works once warm.
Needs choke to cold start but then have to shut off choke almost immediately.
No comments:
Post a Comment